41 00... Body Gap Dimensions
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The dimensions specified in this information are applicable at an object temperature of 20°C. The aim of adjustment is to achieve a uniform gap.
Symmetry of the gaps between left and right sides of the vehicle has top priority.
The door gaps must not deviate between the front and rear gap by more than 1.0 mm.
No gap dimension are specified for components which cannot be adjusted.
Dimensions in mm
Fig 1: Hood, Front Fender, Front Bumper, Headlamps, Front Door And Door Sill Trim Body Gap Dimensions And Measurement Points
Dimension (a) 0.8 ± 1.0 is reduced in the rearward direction of travel to 1.8 ± 1.0
Fig 2: Front Fender, Front Door, Quarter Panel And Sidemember Trim Cover Body Gap Dimensions And Measurement Points
Fig 3: Quarter Panel, Trunk Lid, Tail Lamps And Rear Bumper Body Gap Dimensions And Measurement Points