LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3964 (Functional Description - F10 - Stability Control System, Tire & Wheel System, Lubrication System) >> Lubrication System - Functional Description >> Oil-pressure control >> Characteristic-map-regulated oil pump

Characteristic-map-regulated oil pump

WARNING: This page does not describe the selected car, but rather 45 other vehicles, including the 2016 BMW M5, 2016 BMW 550i xDrive, 2016 BMW 550i, 2016 BMW 535i xDrive, and 2016 BMW 535i. However, it is still accessible from the selected car via links, so may be relevant.

A familiar pendulum slide cell pump is used as the oil pump. The pump shaft for the supply is seated off-center in the housing and the vanes are displaced radially during rotation. This means that the vane chambers form different volumes. When the volume rises, the oil is taken in; when the volume decreases, oil is pressed into the oil ducts.

Fig 1: Identifying Regulated Oil Pump Related Components
G09910063Courtesy of BMW OF NORTH AMERICA, INC.
Index Explanation
1 Pump shaft
2 Rotational axis
3 Vane
4 Rotor
5 Pendulum slide
6 Control piston, pendulum support
7 Control spring
8 Compression spring
9 Control piston

The oil pump is driven by a chain from the crankshaft.