51 24 165 Removing and installing/replacing side left or right buffer stops on rear lid
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The operation is described on the left side; proceed in the same way for the right side. Press plug (1) on buffer stop (2) in direction of arrow.
IMPORTANT:
Plugs must not drop into rear lid.
Installation:
Adjust both buffer stops (2) (work is described in Adjusting rear lid lock).