LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 391 (Brakes - Repair Instructions) >> Brakes Testing And Bleeding >> 34 00 025 Replacing fluid in ABS/ASC+T brake system >> Notes

34 00 025 Replacing fluid in ABS/ASC+T brake system: Notes

WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

IMPORTANT: When carrying out repairs to the brake system, follow the procedure set out in Bleeding brake system with DSC, refer to 34 00 050 BLEEDING BRAKE SYSTEM WITH DSC .

Connect bleeder unit to expansion tank and switch on.

NOTE: Check relevant Operating Instructions for each device. Charging pressure should not exceed 2 bar.
Fig 1: Connecting Bleeder Unit To Expansion Tank (ABS/ASC+T Brake System)
G03287239Courtesy of BMW OF NORTH AMERICA, INC.