11 36 048 Removing And Installing/Replacing Inlet And Exhaust Adjustment Units On Right Side (N62): Notes

WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For Special Tool identification, refer to ENGINE - SPECIAL TOOLS - 645CI .

Special Tools Required:

11 9 190
11 9 460
11 9 461
11 9 462
11 9 463

(cylinder bank 1 to 4)

Read fault memory and make a documentary record.

Remove servomotor for right eccentric shaft. Refer to 11 37 024 REMOVING AND INSTALLING/REPLACING SERVOMOTOR FOR RIGHT ECCENTRIC SHAFT (N62) .

Remove right cylinder head cover. Refer to 11 12 006 REMOVING AND INSTALLING / SEALING RIGHT CYLINDER HEAD COVER (N62 / N62TU) .

Remove all spark plugs on cylinder bank 1 to 4.

If necessary, remove fan cowl.

Remove right timing case cover, refer to 11 14 085 REMOVING AND INSTALLING TOP RIGHT TIMING CASE COVER (N62 / N62TU) .