34 11 Front Brake E60
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2007 BMW 530xi, 2007 BMW 530i, 2007 BMW 525xi, 2007 BMW 525i, and 2006 BMW 530xi. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BRAKE E60 SPECIFICATIONS
| Different thicknesses on brake linings | max. mm | 0.01 |
| Surface roughness of braking surfaces (precision-turned) |
0.5-3.5 | |
| Brake disc diameter Models: 520i 525i 525d |
mm | 310 |
| Brake disc diameter Models: 530i 530d 630i |
mm | 324 |
| Brake disc diameter Models: 545i 535d 645Ci |
mm | 348 |
| Wear warning from residual lining thickness | mm | 3.0 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 520i 525i 525d |
mm | 22.4 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 530i 530d |
mm | 28.4 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 545i 645Ci 630i |
mm | 28.4 |
| Brake disc minimum thickness (MIN TH) stamped on brake disc body Models: 535d |
mm | 34.4 |
| Max. machining limit per friction ring side (M models must not be machined!) | mm | 0.8 |