11 11 Engine Block, Cylinder Crankcase M54 B 30
WARNING: This page is about a different car, the 2005 BMW 530i, 2005 BMW 525i, 2004 BMW 530i, and 2004 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE M54 B 30 SPECIFICATIONS
| Bore hole diameter (1) | mm | 84.000+0.010 | ||
| 1. Interference (1) (only permitted for aluminum engine block with cast iron liners) | mm | 84.250+0.010 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.010 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||