11 12 Cylinder Head with Cover M54
WARNING: This page is about a different car, the 2005 BMW 530i, 2005 BMW 525i, 2004 BMW 530i, and 2004 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER M54 SPECIFICATIONS
| Cylinder head height: Original dimension | mm | 140.0 |
| Machining limit refer to 11 12 719 RESURFACING CYLINDER HEAD SEALING SURFACE (M52 / M52TU / M54 / M56) . | mm | 139.7 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of valve guide (installed) | ||
| Standard | mm | 6.0 H7 |
| Size 1 | mm | 6.1 H7 |
| Size 2 | mm | 6.2 H7 |
| Max. permissible tilt clearance (between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Pilot bearing (1) width | mm | 20 d8 |