LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 373 (Heating & Air Conditioning - Repair) >> Condenser and dryer >> 64 53 518 Replacing desiccant insert for A/C system (condenser removed)

64 53 518 Replacing desiccant insert for A/C system (condenser removed)

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2007 BMW M5, 2007 BMW 550i, 2007 BMW 530xi, 2007 BMW 530i, and 2007 BMW 525xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Read and comply with warnings relating to working on A/C systems. See 64 52 ... Notes/Instructions On Working On Air-Conditioning Systems .

Remove protective cap (1) from condenser for A/C system (2).

Fig 1: Removing Protective Cap From Condenser For A/C System
G00432933Courtesy of BMW OF NORTH AMERICA, INC.

Press sealing cap (1) inwards and remove circlip (2).

Fig 2: Pressing Sealing Cap Inward And Removing Circlip
G00432934Courtesy of BMW OF NORTH AMERICA, INC.

Remove protective cap (2) from condenser for A/C system (3) with aid of an inserted screw (1).

Fig 3: Using Screw To Remove Protective Cap
G00432935Courtesy of BMW OF NORTH AMERICA, INC.

During installation, replace sealing rings (1) of sealing cap (2) and coat with suitable refrigerant oil.

Fig 4: Replacing Sealing Rings
G00432936Courtesy of BMW OF NORTH AMERICA, INC.

Remove desiccant insert for A/C system (1) in direction of arrow from condenser for A/C system (2).

Fig 5: Removing Desiccant Insert For A/C System
G00432937Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals