61 71 100 Removing and installing/replacing windshield washer pump

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 530xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before replacing the windscreen washer pump, check the fluid reservoir for dirt contamination and clean if necessary!

Necessary preliminary tasks:

If necessary, remove FRONT LEFT WHEEL
Remove FRONT UNDERBODY PROTECTION

NOTE: For purposes of clarity, illustration shows front wheel removed.

Release screws.

Fold back wheel arch trim (1) in direction of arrow.

Fig 1: Folding Back Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Catch any escaping washer fluid if necessary.

Disconnect plug connection (1).

Detach hose (2) from windscreen washer pump (3).

Pull windscreen washer pump (3) in direction of arrow out of fluid reservoir for windscreen washer unit (4).

Fig 2: Detaching Hose From Windscreen Washer Pump

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for windscreen washer pump.
If necessary, coat sealing ring of windscreen washer pump with antiseize agent.
Ensure hose is laid without kinks.
Fill fluid reservoir