61 31 270 Replacing switch for reversing light

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 530xi. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The installation location of the reversing light switch can vary, depending on the transmission model.

Necessary preliminary tasks:

If necessary, remove REAR UNDERBODY PROTECTION

Version A:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque: 16 Nm

Fig 1: Identifying Switch For Reversing Light And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Version B:

Disconnect plug connection (1).

Release switch for reversing light (2).

Tightening torque: 16 Nm

Fig 2: Identifying Switch For Reversing Light And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.