61 31 233 Removing and installing/replacing Lane Departure Warning motor electrics (sport steering wheel)

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 530xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove DECORATIVE BAR FROM STEERING WHEEL

Release screws (1) and remove retaining plate (2).

Tightening torque: 6 Nm

Fig 1: Identifying Retaining Plate And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2).

Release screws (3) and remove motor electrics (4) complete with electrical wires.

Installation:

Replace screws (2 and 3).

Tightening torque: 3 Nm
Tightening torque: 4 Nm

Ensure correct cable routing.

Fig 2: Identifying Motor Electrics, Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.