61 31 109 Removing and installing/replacing Dynamic Stability Control switch (M5)

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove FINISHER FOR PRESELECTOR LEVER

Release screws (1).

Remove switch for Dynamic Stability Control (2) from trim for preselector lever (3).

Fig 1: Identifying Screws And Switch For Dynamic Stability Control

Courtesy of BMW OF NORTH AMERICA, INC.