00...... Notes on Using Repair Instructions, Technical Data, Tightening Torques

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 BMW 530i, 2007 BMW 525i, 2006 BMW 530i, 2006 BMW 525i, and 2005 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.

These repair instructions are intended to help expertly carry out maintenance and repair work.

The Repair Instructions describes the removal, installation and replacement of subassemblies in the vehicle.

The Repair Instructions describe tasks which can be carried out on series-production BMW Group vehicles and vehicles which have not been subsequently converted.

Cross-references to "Technical Data" and "Tightening Torques" must be complied with.

If there are no cross-references to tightening torques in the repair instructions, the excerpts from the company standard BMW N 600 02.0 must be observed.

The structure of the Repair Instructions corresponds to the numbering system of the flat rate manuals (flat rate units).

In general, the individual work steps of the Repair Instructions describe only the removal of subassemblies. All removed subassemblies are reinstalled in reverse sequence. If particular features need to be observed during installation, they are identified as notes on installation. In contrast, complicated removal and installation procedures are described separately.