17 11 000 Removing and installing radiator (S85)

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of scalding!
Only perform this work after engine has cooled down.

Necessary preliminary tasks:

Follow instructions for working on cooling system.
Remove fan cowl .
Drain coolant.

Release and disconnect coolant hoses (1).

Release clamp (2), detach coolant hose.

Fig 1: Identifying Coolant Hoses And Clamp

Courtesy of BMW OF NORTH AMERICA, INC.

Release and disconnect coolant hoses (1).

Release clamp (2), detach coolant hose.

Remove radiator towards top.

Installation:

Ensure correct seating in side guides.

Fig 2: Identifying Coolant Hoses And Clamp

Courtesy of BMW OF NORTH AMERICA, INC.

Vent cooling system and check for leaks.