13 62 Senders for Control Unit
WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SENDERS FOR CONTROL UNIT
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Temperature sensor, coolant / oil | N63 / S63 | M12x1.5 | 13.5 Nm | |
| 2AZ Pressure sensor to intake manifold | N63 / S63 | K50x14 | 3.5 Nm | |
| 3AZ Camshaft sensor to cylinder head | N63 / S63 | M6 | 9 Nm | |
| N63 / S63 | K50 | 5 Nm | ||
| 4AZ Crankshaft sensor to transmission | N63 / S63 | M6 | 9 Nm | |
| 5AZ Knock sensor to crankcase | N63 / S63 | M8 | 21.5 Nm | |
| 6AZ Air-mass meter to upper section of intake filter housing | N63 | K50x16 | 3.5 Nm | |
| 7AZ Pressure sensor to intercooler | N63 / S63 | M6 | 4 Nm |