13 51 Injection pump, control
WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ High-pressure pump to cylinder head cover |
N63 / N63 Hybrid / S63 |
M6 |
Replace screws.
Tighten bolts to final torque/angle in uniform increments of 90°. Follow repair instruction! |
12 Nm |