51-2190 Adjuster

WARNING: This page is about a different car, the 2014 BMW X6 M, 2013 BMW X6 M, 2012 BMW X6 M, 2011 BMW X6 M, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.

0494325 512190 Adjuster Minimum set: Mechanical tools MW

NOTE: (door lock tensioner) For pre-tensioning front and rear door locks when installing. Change to tool through use of noise-optimised locks from 02/2004. Illustration items: 1 = Knurled nut 51 2 191 2 = Support 51 2 192 3 = Guard 51 2 196 4 = Mandrel 51 2 197 [Released]

Fig 1: Identifying Adjuster (0494325)

Courtesy of BMW OF NORTH AMERICA, INC.

Storage Location

B44

C44

SI number

01 06 02 (864)

Consisting of:

4 = 0494907 Mandrel
NOTE: Replaces mandrel 51 2 194 [Released]
3 = 0494906 Guard
NOTE: Replaces guard 51 2 193 [Released]
2 = 0494474 Shaped element
NOTE: E85 (Discontinued) [Discontinued]
2 = 0494473 Mandrel
NOTE: Is replaced by 51 2 197 with the use of noise-optimised locks from 02/2004 Replaced by 51 2 197 (0 494 907) [Replaced]
2 = 0494472 Guard
NOTE: Is replaced by 51 2 196 with the use of noise-optimised locks from 02/2004 Replaced by 51 2 196 (0 494 906) [Replaced]
2 = 0494471 Upholstery
NOTE: [Released]
1 = 0494470 Nut
NOTE: (Knurled nut) Replaced by 00 9 120 (0 490 504) [Released]