63 31 178 Removing and installing/replacing LED for storage box

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove STORAGE BOX .

Pull LED for storage box (1) in direction of arrow out of storage box (2).

Feed wiring harness (3) out of storage box (2) and remove LED for storage box (1).

Fig 1: Pulling LED Out Of Storage Box

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Note installation position of LED for storage box (1). Light outlet side must be positioned in direction of storage box (2).

Make sure wiring harness (3) is correctly laid on storage box (2).