33 10 021 Replacing output shaft seal in rear axle final drive: Notes

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

13 5 251
13 5 253
33 0 130

IMPORTANT: Up to build date 07/2008:
Renew shaft seal in combination with DRIVE FLANGE and circlip only!
Build date from 07/2008:
Renew shaft seal in combination with circlip only!