65 50... Removing and installing/replacing IR board for rear cabin monitor

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove trim for rear cabin AT FRONT AND REAR BASE .

Release electric cable (1) from guides.

Installation:

Ensure correct cable routing.

Fig 1: Identifying Electric Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove IR board and disconnect associated plug connection.

Fig 2: Identifying IR Board Screws

Courtesy of BMW OF NORTH AMERICA, INC.