65 50 570 Replacing rear cabin monitor display

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks

Remove TRIM FOR REAR CABIN MONITOR DISPLAY AT FRONT AND REAR .

Disconnect plug connection (1).

Unfasten screws (2).

Tightening torque 64 52 3AZ .

Release screw (3) and remove display (4) towards top.

Tightening torque 65 52 4AZ .

Installation:

Remove protective film from replacement display.

Fig 1: Identifying Display, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.