41 12 557 Replacing Luggage Compartment Floor, Middle Stripping Operations (Tail Panel Removed)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
The following list basically represents the removal sequence.
- Remove exhaust system (job number: 1800020).
- Remove heat shield.
- Remove positive battery cable (job number: 6112002).
- Remove air supply system (job number: 37 22 540).
Release nuts for sealing flange connection (1).
Remove sealing flange connection with positive battery cables (2) and set aside.
Installation note:
Make sure gasket is correctly installed. (watertightness).
Replace gasket if necessary.
Replace M5 nuts for sealing flange connection.
IMPORTANT:
Risk of damage!
Protect positive battery cables against mechanical damage.
Protect positive battery cables against mechanical damage.