4. Welding

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

During MAG welding, the weld gap must be kept as small as possible. The larger the weld gap, the lower will be the strength of the joint.
During spot-welding, the metal flanges to be joined must be placed as close together as possible without gaps.
The larger the gap, the lower will be the strength of the joint.

Minimum gap between welding spots 25 mm.