LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3042 (Collision - Body Panel Repair (E70)) >> Body Panel Repair >> 41 00... Soldering Steel Components >> 6. Notes On Melting/Tinning

6. Notes On Melting/Tinning

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Only applicable within the European Union!

European used-car regulations prohibit the use of tin containing lead in motor vehicles introduced after 01.07.2003!

Even out unevenness smaller than 2 mm with filler according to painting handbook

If an exceptional unevenness is larger than 2 mm, use METAL FILLER .

Only perform in visible areas of the outer skin and on the carrier support.

All areas which have covers on the vehicle are not to be processed.