1. General Information
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
- For repair cases the following method will implemented:
- Gas brazing
- The MIG soldering procedure is not used in repairs for strength reasons. MIG soldered/brazed seams used in series production are replaced in repairs by MAG weld seams .
- Brazed areas from vehicle production are bonded with the same method.