LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3042 (Collision - Body Panel Repair (E70)) >> Body Panel Repair >> 41 00... Opening Welded Connections >> 2. Opening MAG Weld Seams And MIG Brazing Seams >> - Procedure

- Procedure

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Grind off weld seams with a belt or angle grinder. Do not grind the base material thin.

Use a chisel to separate the sheet metal flange and remove the component.

scientia non olet · About LEMON Manuals