LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3042 (Collision - Body Panel Repair (E70)) >> Body Panel Repair >> 41 00... Opening Welded Connections >> 1. Opening Welding Spots (Resistance Pressure Spot Welding) >> Notes

1. Opening Welding Spots (Resistance Pressure Spot Welding): Notes

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Sheet steel panels made from high- and super-high-strength materials make great demands on the tools used.

Only with special carbide milling cutters can welding spots be drilled out on these sheet panels.

Use BTR/BOR milling cutters only in conjunction with Vario Drill spot-weld remover.

scientia non olet · About LEMON Manuals