1. Opening Spot-Weld Bonds
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Extract vapours and gases.
Use personal protective clothing/equipment.
Use personal protective clothing/equipment.
Heat connecting flange with a hot-air blower. Heat components to max. 250 °C object temperature.
Release connection flange with chisel.
Remove adhesive residue from connecting flange.