41 00... Information On Metal Filler: Processing

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

The working temperature of the metal filler must be at least 18°C.

Fig 1: Identifying Metal Filler And Hardener

Courtesy of BMW OF NORTH AMERICA, INC.

= Metal filler
= Hardener

NOTE: The mixture ratio refers to the volume.

Mix metal filler in mixture ratio of 5:2. Mix components thoroughly and free of pores.

IMPORTANT: Do not stir components. Danger of air pockets in metal filler!

Working life of the metal filler is approx. 45 minutes.