41 0 0 Contents Of Body Repair General Information

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

General notes → QUALITY STANDARD → WORKSHOP EQUIPMENT

Safety regulations → SAFETY AT WORK → INFORMATION ON HAZARDS

→ Information on VEHICLE PROTECTION

Materials → MATERIALS SCIENCE → USE OF MATERIALS in outer shell

→ EXPENDABLE MATERIALS

Handling components after an accident → ELECTRICAL SYSTEM , electronics and fibre optics.

→ Passive safety See 41 00... HANDLING AIRBAGS AND RESTRAINT SYSTEMS or 72 12... PROCEDURE AFTER AIRBAG DEPLOYMENT AS RESULT OF AN ACCIDENT

→ Vehicles with Hybrid drive

→ CHASSIS, SUSPENSION AND STEERING

→ Retractable hardtop

Body dimensions → 41 00... FRAME ALIGNMENT CONTROL BODY DIMENSIONS .

→ 41 00... BODY GAP DIMENSIONS

Cavity sealing → Installation of shaped parts See 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (EXPANDED) , 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (NOT EXPANDED) or 41 00... INSTALLING A CAVITY SEALING WITH 2-COMPONENT PU CAVITY FOAM

→ POSITION OF SHAPED PARTS

Vehicle identification number → VEHICLE IDENTIFICATION NUMBER, GENERAL

→ STAMPING VEHICLE IDENTIFICATION NUMBER

Repair techniques → REPAIR STAGE 1

Replacement of screwed-on components.
Removing dents.

→ REPAIR STAGE 2

Bonding and riveting
Welding using a MAG welder
without straightening bench

→ REPAIR STAGE 3

Bonding and riveting
Welding using a spot welding system
with a straightening bench

Corrosion protection → GENERAL INFORMATION

Paint → GENERAL INFORMATION

→ INFORMATION / WARNING LABELS

→ Sectional painting See 99 00... SEPARATE COMPONENTS/PAINTWORK , 99 00... INTERIOR PAINTING or 99 00... SECTIONAL PAINTING