22 11 001 Replacing right engine mount (N63, S63)

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work

Remove ENGINE SUPPORT ARM .

Release screws (1) and remove engine mount (2).

Tightening torque 22 11 1AZ .

Fig 1: Identifying Engine Mounting With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Holes (1) in engine mount must point to centre of vehicle.

Fig 2: Identifying Engine Mounting Holes

Courtesy of BMW OF NORTH AMERICA, INC.