Method A
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Press out excess butyl with fishbone 00 9 321
under seal (1).
Courtesy of BMW OF NORTH AMERICA, INC.
Stick adhesive strip (1) onto butyl and press down gently with fishbone 00 9 321
.
IMPORTANT:
Risk of paintwork damage!
Courtesy of BMW OF NORTH AMERICA, INC.
Pull off adhesive strip (1).
If necessary, repeat procedure with new adhesive strip until butyl is removed.
Courtesy of BMW OF NORTH AMERICA, INC.