LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3036 (Slide/Tilt Roof - Repair) >> Electrical Sun Roof Components >> 54 13 002 Adjusting both glass slide/tilt sunroof panel >> Distance setting

Distance setting

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Distance A between body and glass slide/tilt sunroof panel (without seal):

  1. = 5.8 ±0.3 mm all round

Check that distance between glass slide/tilt sunroof covers and body is the same with special tool 00 9 340 .

Slide special tool 00 9 340 between gasket and insert. It must be possible to slide the card against the same level of resistance.

Fig 1: Sliding Special Tool (00 9 340) Between Gasket And Insert
G08530096Courtesy of BMW OF NORTH AMERICA, INC.