17 00 039 Venting and filling cooling system with vacuum filling unit: Notes
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
| Type | Engine | Adapter Y from 17 0 100 |
|---|---|---|
| E60 / E61 / E63 / E64 | All | 17 0 113 |
| E65/E66 | M54 / N52 / N62 / N62T / N73 | 17 0 105 |
| E65/E66 | M57S / M57T / M67 / M67T | 17 0 113 |
| E70 / E71 / E72 | All | 17 0 113 |
| E81/ E82/ E84/ E87/ E88/ E89 | All | 17 0 113 |
| E83 | M54/ N46/ N52K | 17 0 105 |
| E83 | M47S / M57S / M57T / M57Y / N47 | 17 0 113 |
| E85 / E86 | All | 17 0 105 |
| E90 / E91 / E92 / E93 | All | 17 0 113 |
| R50 / R52 | W10 | 17 0 107 and 17 0 102 |
| R50 | W17 | 17 0 109 |
| R52 / R53 | W11 | 17 0 109 |
| R55 / R56 / R57 / R58 / R60 / R61 | All | 17 0 109 |
| F25 | All | 17 0 113 |
| F20 / F21 / F30 / F31 | N47 D20 K/U/O/T 1 | 17 0 113 |
| F20 / F21 / F30 / F31 / F35 | N13 / N20 | 17 0 113 |
| F30 / F31 / F35 | N55 / N55 hybrid car | 17 0 113 |
| F30 / F31 | N57 D30 O/T 1 | 17 0 113 |
IMPORTANT:
Lifetime coolant filling:
Never reuse used coolant!
When replacing and removing components which rely on the corrosion protection effect of the coolant, it is essential to change the coolant. The cooling system must therefore be drained and refilled.
In the case of other removal work involving the draining of part quantities of coolant, replace these quantities which have been drained with new coolant.
Never reuse used coolant!
When replacing and removing components which rely on the corrosion protection effect of the coolant, it is essential to change the coolant. The cooling system must therefore be drained and refilled.
In the case of other removal work involving the draining of part quantities of coolant, replace these quantities which have been drained with new coolant.
IMPORTANT:
You must protect the alternator against contamination by coolant when carrying out repair work on the cooling circuit.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator malfunction.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator malfunction.
Note on ordering:
- Workshop equipment
- Workshop equipment catalogue
- Filler unit no. 81 39 2 152 473
- Collecting vessel no. 81 49 2 152 347
- Adapter: 17 0 100
IMPORTANT:
Risk of slipping due to coolant on the floor.
Danger of injury!
Danger of injury!
Catch and dispose of emerging coolant in drip tray (1) and if necessary special tool 00 2 030 (universal hydraulic lifting equipment).