LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3031 (Body Equipment - Repair) >> Mirrors, Covers, Ashtrays, Shelves, Trays >> 51 16... Gluing of mirror base >> 3. Gluing coat >> 3.3 Fixing Bonded Parts

3.3 Fixing Bonded Parts

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Epoxy resin glue does not have an initial strength property. It is therefore necessary to fix all bonded parts (adhesive tape or similar). The joining and fixing of bonded parts must be accomplished within the potlife). Check that the arresting button is located correctly on the mirror base to ensure that the mirror, when it is attached, is seated straight.

(Long side of mirror base hexagon parallel to upper edge of window).

scientia non olet · About LEMON Manuals