51 71 099 Removing and installing/replacing radiator air guide

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove CARRIER FOR BUMPER TRIM AT FRONT

Release expanding rivets (1).

Release catch (2) and remove intake duct (3) towards top.

Fig 1: Identifying Expanding Rivets, Catch And Intake Duct

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1, 2).

Unclip hose (3) and feed out air duct towards top.

Fig 2: Identifying Plug Connections And Hose

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Modify all rubber seals (1) and sheet nuts (2) on air duct, replace if necessary.

Modify outside temperature sensor (3).

Optional extra:

Modify AIR FLAP CONTROL .

Fig 3: Identifying Rubber Seals, Sheet Nuts And Outside Temperature Sensor

Courtesy of BMW OF NORTH AMERICA, INC.