11 22 510 Removing and installing/replacing flywheel, gearbox removed (S63)

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

11 9 260

Secure flywheel (1) with special tool 11 9 260 .

Fig 1: Securing Flywheel Using Special Tool (11 9 260)

Courtesy of BMW OF NORTH AMERICA, INC.

Release flywheel screws in area (1).

Remove flywheel (2).

Installation:

Clean threads on flywheel screws in crankshaft.

Flywheel (2) is secured with an alignment pin.

Fit flywheel (2).

Fit new flywheel screws.

Tightening torque 11 22 1AZ .

Fig 2: Identifying Flywheel And Flywheel Screws Area

Courtesy of BMW OF NORTH AMERICA, INC.