LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3025 (Brakes - Repair) >> Brake Testing And Bleeding >> 34 00 025 Replacing fluid in ABS/ASC+T brake system >> Necessary preliminary tasks

Necessary preliminary tasks

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: When carrying out repairs to the brake system, follow the procedure set out in BLEEDING BRAKE SYSTEM WITH DSC .

Use only BMW-approved brake fluids, see BRAKES - OPERATING FLUIDS .

Connect brake fluid changer to expansion tank and switch on.

NOTE: Check relevant equipment manufacturer's operating instructions for each device.
Charging pressure should not exceed 2 bar.
Fig 1: Bleeding Brake System Using DSC
G08528081Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals