64 11 837 Replacing actuator drive for right stratification flap

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work

Remove INSTRUMENT PANEL TRIM .

NOTE: For purposes of clarity, following graphics show instrument panel carrier removed.

Release screws (1).

Remove servomotor (2) and disconnect plug connection (3).

Fig 1: Identifying Servomotor, Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Servomotors must be re-addressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

Body
Heating and air conditioning function
Flap motors
Re-address flap motors