61 71 015 Removing and installing/replacing a spray nozzle in windscreen washer system
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Unlock retaining clip for water hose (1) and detach water hose in direction of arrow.
Disconnect plug connection (2) and detach in direction of arrow.
Press spray nozzle (3) in direction of arrow (A) and remove at top in direction of arrow (B).
Installation:
- Retaining lugs (1) must not be damaged.
- Check ADJUSTMENT OF SPRAY NOZZLES and correct if necessary.