61 31 334 Removing and installing/replacing grip trim for gear selector switch
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Turn circlip (1) in direction of arrow and remove.
Installation:
Make sure circlip (1) is correctly seated.
Insert special tool 64 1 030 into trim (1) from below and carefully pull trim (1) away in the direction of the arrow.
Remove symbol plate (2).
Installation:
To facilitate fitting, secure pushbutton (3) with adhesive tape on trim (1).