61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Risk of damage!
Protect middle fresh-air grille in working area against damage, tape off if necessary.
Protect middle fresh-air grille in working area against damage, tape off if necessary.
Lever switch for hazard warning flashers/central locking (1) with special tool 00 9 340 out of middle fresh-air grille and feed out
Disconnect associated plug connection and remove switch for hazard warning flashers/central locking (1).