61 14 010 Removing and installing/renewing power distribution box (on battery)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Observe SAFETY INFORMATIONS for handling vehicle battery.
Follow instructions on INTELLIGENT BATTERY SENSOR (IBS) .
Follow instructions on INTELLIGENT BATTERY SENSOR (IBS) .
Necessary preliminary work
- Disconnect BATTERY EARTH LEAD .
Additionally E70 Security (optional equipment 106):
- Disconnect Security positive battery cable.
Disconnect plug connection (1).
Open cover, release nut (3) underneath and disconnect positive battery cable. Tightening torque 61 21 4AZ .
Open cover (5) and release nut (4). Tightening torque 61 21 2AZ .
Using a suitable tool, expand locking bracket (6) at lower end and clip out.
Lift power distribution box (2) out of battery.