LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3021 (General Electrical System - Repair) >> Control Units, Modules >> 61 35 975 Removing and installing/replacing bumper aerial/antenna for Comfort Access System

61 35 975 Removing and installing/replacing bumper aerial/antenna for Comfort Access System

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks 

Reach in middle behind bumper trim at rear and disconnect plug connection (1).

Unlock catches (2) and feed bumper aerial/antenna for comfort access system (3) in direction of arrow out of holder.

Installation note: 

Make sure bumper aerial/antenna for comfort access system (3) is correctly seated and engaged in holder.

Fig 1: Unlocking Catches And Bumper Aerial/Antenna For Comfort Access System
G08530596Courtesy of BMW OF NORTH AMERICA, INC.