Installation note
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Replace sealing ring.
Top up automatic transmission fluid until it emerges from filler opening.
Start engine.
Replenish automatic transmission fluid until it emerges from filler opening.
Screw in oil filler plug (1).
Tightening torque: 24 11 7AZ .
Press brake pedal to floor and shift through all gears several times at idle speed. Then shift to "P" position (Park).
Then check oil level.