52 10 Front seats
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT SEATS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Seat to floor panel | E70 / E71 / E72 | (trilobular) | Replace Powerlok screw | 43 Nm |
| 2AZ Backrest frame to seat frame | E70 / E71 / E72 | (trilobular) | Replace Powerlok screw | 31 Nm |
| 3AZ Active head restraint - Sliding rails with gas cartridge | E70 / E71 / E72 | 8 Nm | ||
| 4AZ Carrier section for electr. operating unit | E70 / E71 / E72 | 8 Nm | ||
| 5AZ Cover to seat | E70 / E71 / E72 | 4 Nm | ||
| 6AZ Seat rails to seat frame | E70 / E71 / E72 | 27 ± 3 Nm | ||
| 7AZ Adjusting switch to cover | E70 / E71 / E72 | 2 Nm | ||
| 8AZ Seat angle adjustment to seat mechanism | E70 / E71 / E72 | M8x30 | 27 ± 3 Nm | |
| 9AZ Seat depth adjustment | E70 / E71 / E72 | 3.0 + 0.5 Nm | ||
| 10AZ Gearbox for backrest upper section adjustment | E70 / E71 / E72 | 2.5 + 0.5 Nm | ||
| 11AZ Retaining screw on head restraint | E70 / E71 / E72 | 4.0 ± 0.2 Nm |