51 13 Trim Parts, Covers, Handle Strip
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRIM PARTS, COVERS, HANDLE STRIP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bracket, roof luggage rack on body | E39 / E46 / E81 / E82 / E87 / E90 / E91 / E92 / E36 / Z3 und M Coupe | M10 | 20 Nm | |
| 2AZ Gutter strip to body (plastic nut) | E46 | 1 Nm | ||
| Gutter strip to body (metal nut or rivet nut) | E46 | 1.8 Nm | ||
| 3AZ Roof railing to body | E39 | Centre, front, rear | 24 Nm | |
| E61 | M8 | 16 Nm | ||
| settling time | 15 min | |||
| Check | 16 Nm | |||
| E83 | M8 | Front Jointing torque | 21 Nm | |
| Release nut after settling time | 15 min | |||
| Jointing torque | 21 Nm | |||
| Angle of rotation | 120 ± 10° | |||
| E83 | M8 | Centre, rear | 21 Nm | |
| settling time | 15 min | |||
| Check | 21 Nm | |||
| E70 / E84 / E91 | 19 Nm | |||
| E71 / E72 | 16 Nm | |||
| 4AZ Handle strip to tailgate | E39 / Touring | 3 Nm | ||
| E46 / E53 | 2.5 Nm | |||
| E83 | 1.8 Nm | |||
| 5AZ Cowl panel cover to body | E60 / E61 / E63 / E64 | 2.5 Nm | ||
| 6AZ Centre trim to tailgate | E65 / E66 / E67 | M8 | 2.5 Nm | |
| 7AZ Trim to engine compartment lid | E90 / E91 | 2 Nm | ||
| 8AZ Additional brake light to tailgate | E89 | 5 Nm | ||
| 9AZ Threaded bolt on sliding carriage (roof railing) | E84 | 15 Nm | ||
| 10AZ Decorative trim, side, to cowl panel | E88 / E93 | 1.8 Nm |