34 51 Slip control system (DSC)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control unit to hydraulic control unit | E70, E71, E72 | Initial tightening Final tightening | 2 ± 0.5 Nm4.3+ 0.5 Nm | |
| 2AZ DSC sensor to floor pan | E70, E71, E72 | 8 Nm | ||
| 3AZ Pulse sensor to swivel bearing/wheel carrier | E70, E71, E72 | 8 Nm | ||
| 4AZ Hydraulic control unit to holder | E70, E71, E72 | M8 | 19 Nm | |
| 5AZ Holder, hydraulic control unit, to body | E70, E71, E72 | 8 Nm | ||
| 6AZ ICM control unit to body | E71, E72 | 8 Nm |