24 13 Transmission Extension, Bearings, Sealing Ring
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION EXTENSION, BEARINGS, SEALING RING
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Slotted nut / output flange | A5S 310Z / A5S 440Z / A5S 560Z / A5S 325Z | 120 Nm | ||
| 2AZ Double hexagon nut/output flange | GA6HP26Z | up to 09/02 without sealing ring in output flange | 80 Nm | |
| GA6HP19Z / GA6HP26Z | from 09/02 with sealing ring in output flange | 60 Nm | ||
| GA8HP45Z | with sealing ring in output flange | 60 Nm | ||
| 3AZ Output shaft nut to output flange | GA6L45R | Replace nut from 01/11 Nut with screw locking in thread | 55 Nm |